Battery adhesive for iPhone 16 Plus – Compatible

Description

This battery adhesive is a double-sided tape designed for the iPhone 16 Plus model. It is used to fix the battery to the device chassis. Once the battery is replaced, it holds it in place and prevents it from moving during use. Correct fixing limits vibrations and contacts that can damage the ribbon cable or the board. This product is a compatible part made by a third party, not an original part.

Before fitting, switch off the device and disconnect the battery before any work on the ribbon cables. Clean the surfaces carefully with a dry, lint-free cloth, then let them dry. Remove the protective film gradually, without touching the sticky side with your fingers, and place the battery while applying gentle, even pressure.

After fitting, check that the battery is firmly pressed down and that nothing sticks out. For a new battery, carry out a few full charge and discharge cycles to stabilise it. Never puncture or bend the battery. If it appears swollen, do not try to operate it.

Tips

• Disconnect the battery before any work on the ribbon cables
• Clean the surfaces with a dry, lint-free cloth
• Do not touch the sticky side with your fingers
• Never puncture or bend the lithium battery
• Swollen battery: do not use it and do not attempt to charge it

Fitting

Fitting guide: work with the device switched off, disconnect the battery before touching any flex cable, keep the screws in order and test the part before closing up. A question before ordering? Write to us.

Specifications

Compatible with

iPhone 16 Plus

Part type

Seal / adhesive

Quality

Compatible

Warranty

2-year legal guarantee of conformity

Benefits

• Third-party manufacture: the lowest price to repair
• Compatibility with the stated model checked on the product page
• 2-year legal guarantee of conformity