Screen adhesive for K7 (2016) (ref. LS675 / MS330) – Compatible

Description

This adhesive secures the screen to the frame of your K7 (2016). Once the screen is replaced, it ensures a clean and even fit of the module and protects the inside of the device against dust and moisture. It is the part to replace when the screen comes loose, shifts or lets water in around the edges.

This version is a compatible part, made by a third party. It matches reference LS675 / MS330 listed on the product sheet, so you can repair your device affordably. Before you start, switch off the device, disconnect the battery and work on a clean, dry surface. Gently warm the edges with a hairdryer set to moderate heat, never overheating them. Avoid bending or puncturing the lithium battery, and do not use it if it is swollen.

After fitting, check that the screen sits firmly across its whole surface and that no area moves. Carry out a few full charging cycles before returning the device to normal use, then check the touch function and the display.

Tips

• Disconnect the battery before touching any ribbon cables.
• Warm the edges gently with moderate heat.
• Never puncture or bend the lithium battery.
• Clean the bonding surfaces before applying the adhesive.
• Check the screen and touch function after fitting.

Fitting

Fitting guide: work with the device switched off, disconnect the battery before touching any flex cable, keep the screws in order and test the part before closing up. A question before ordering? Write to us.

Specifications

Compatible with

K7 (2016)

Part type

Seal / adhesive

Quality

Compatible

Warranty

2-year legal guarantee of conformity

Benefits

• Third-party manufacture: the lowest price to repair
• Compatibility with the stated model checked on the product page
• 2-year legal guarantee of conformity