5G LCD Adhesive for Galaxy S20+ – Compatible

Description

The LCD adhesive Galaxy S20+ is a double-sided tape that secures the screen to the device casing. It holds the display in place and seals the area around the screen, which stops it from lifting and prevents dust from getting in. This part is useful when the current part is worn, no longer holds, or after replacing a cracked screen or display.

This part is a compatible version, made by a third party. It performs the same function as the current part, but its cut and material may differ slightly. Before you start, switch off the device, disconnect the battery and clean the surfaces carefully with a lint-free cloth. Avoid touching the sticky side with your fingers.

After fitting, check that the screen lies flat and that no edge is lifting. Allow the adhesive enough time to set before closing the device. Then watch the temperature and how well the screen holds over a few days of use.

Tips

• Disconnect the battery before any work on the screen
• Clean the surfaces before applying the new adhesive
• Do not touch the sticky side with your fingers
• Let the adhesive set before closing the device
• Check that the screen stays flat after fitting

Fitting

Fitting guide: work with the device switched off, disconnect the battery before touching any flex cable, keep the screws in order and test the part before closing up. A question before ordering? Write to us.

Specifications

Compatible with

Galaxy S20+

Part type

Seal / adhesive

Quality

Compatible

Warranty

2-year legal guarantee of conformity

Benefits

• Third-party manufacture: the lowest price to repair
• Compatibility with the stated model checked on the product page
• 2-year legal guarantee of conformity