3M back glass adhesive for iPhone 14 Pro – Compatible

Description

This 3M adhesive is used to fix the rear glass of your iPhone 14 Pro to the chassis. Once the glass has been removed, it provides a clean and even bond, replacing the worn or loose part currently fitted. It is particularly useful when the glass lifts, moves or lets dust and moisture in around its edge.

This part is a compatible version, made by a third party. It is aimed at people who want to repair their device themselves at a lower cost. Take the time to clean the bonding surfaces thoroughly with a dry, lint-free cloth, then carefully remove any residue of the current part without scratching the glass or the chassis.

Before refitting the glass, check that the adhesive covers the whole edge and that no area overhangs. Then press down gradually to push out any air bubbles, and leave the bond to set for the time indicated. For safety, avoid bending or puncturing the device's battery, and disconnect it before any work near the ribbon cables.

Tips

• Clean the bonding surfaces with a dry, lint-free cloth
• Remove residue from the current part without scratching the glass or chassis
• Align the front glass before pressing it down to avoid misalignment
• Disconnect the battery before any work near the ribbon cables
• Allow the drying time to pass before using the device

Fitting

Fitting guide: work with the device switched off, disconnect the battery before touching any flex cable, keep the screws in order and test the part before closing up. A question before ordering? Write to us.

Specifications

Compatible with

iPhone 14 Pro (A2890, A2650)

Model reference

A2890, A2650

Part type

Seal / adhesive

Quality

Compatible

Warranty

2-year legal guarantee of conformity

Benefits

• Third-party manufacture: the lowest price to repair
• Compatibility with the stated model checked on the product page
• 2-year legal guarantee of conformity