Front camera test cable for iPhone 11 Pro / 11 Pro Max

Description

This test cable lets you check the front camera of the iPhone 11 Pro or 11 Pro Max during a repair. It connects between the logic board and the camera module to find out whether the fault really comes from the camera or from another component. It helps diagnose a front camera that won't switch on or shows a black or blurred image, without replacing the part straight away.

This tool is a compatible part made by a third party. Before using it, disconnect the device's battery to avoid a short circuit when handling the ribbon cables. Work on a clean surface, with an anti-static wrist strap if possible, and avoid bending the fine connectors. Handle the cables by their bracket, never by pulling on the wire.

After testing and reassembly, reconnect the battery and check the camera works before fully closing the device. If the battery is swollen, do not use it and do not puncture or bend it. Keep heat moderate during the work.

Tips

• Disconnect the battery before connecting the test cable
• Handle the ribbon cables by their bracket, without pulling on the wire
• Work with an anti-static wrist strap to protect the board
• Test the camera before fully closing the device
• A swollen battery must never be used or punctured

Fitting

Fitting guide: work with the device switched off, disconnect the battery before touching any flex cable, keep the screws in order and test the part before closing up. A question before ordering? Write to us.

Specifications

Compatible with

iPhone 11 Pro Max, iPhone 11 Pro

Part type

Tool

Warranty

2-year legal guarantee of conformity