Dot Projector flex cable JC Programmer for Apple iPhone 12/iPhone 12 Pro
Check your exact model before ordering: a All models does not accept parts from another version (mini, Plus, Pro, Ultra…). Find my model
Description
This compatible Dot Projector flex cable is a repair part for the Face ID sensor module of the iPhone 12 and iPhone 12 Pro. It connects the dot projector to the device's logic board and allows you to replace the current part when facial recognition no longer works properly.
The flex cable is supplied as a third-party manufacture, described as compatible. Before fitting, switch the device off completely, disconnect the battery and work on a clean, anti-static surface. Avoid bending the flex cable and handle it by its edges so the connectors are not damaged.
After reassembly, check that Face ID works in the settings before closing the phone completely. If recognition remains unstable, check that the connectors are properly seated and that there is no dust or dirt under the sensors.
Tips
- Disconnect the battery before touching the flex cables
- Work on a clean, anti-static surface
- Do not bend the flex cable and avoid stress on the connectors
- Check that it is properly seated before closing the device
- Test Face ID before full reassembly
Fitting
Fitting guide: work with the device switched off, disconnect the battery before touching any flex cable, keep the screws in order and test the part before closing up. A question before ordering? Write to us.
Specifications
- Compatible with
- All models
- Part type
- Tool
- Warranty
- 2-year legal guarantee of conformity