GPS flex cable for iPhone 13 – Compatible

Description

The GPS flex cable iPhone 13 is a flexible spare part that connects the device's GPS chip to the motherboard. It carries the location signals, allowing the device to position itself in map, navigation or sports tracking apps. When it is faulty, you often notice that location is missing, inaccurate or very slow to lock on, sometimes accompanied by an error message in the settings.

This cable is a compatible part made by a third-party manufacturer, offered as an economical solution to repair your device. Before starting, switch the phone off completely, remove the battery if the procedure requires it, and work on a clean, flat surface. Avoid static electricity by touching an earthed metal surface, and handle the cable by its edges so as not to bend or tear it.

After fitting, power the device back on and check location outdoors, in an open area. Wait a few minutes for the GPS to synchronise. If the battery was disconnected, let it charge normally and avoid excessive heat during the repair.

Tips

• Switch the device off and disconnect the battery before touching the cable
• Handle the cable by its edges, without bending or piercing it
• Avoid static electricity throughout the handling
• Test location outdoors, in an open area

Fitting

Fitting guide: work with the device switched off, disconnect the battery before touching any flex cable, keep the screws in order and test the part before closing up. A question before ordering? Write to us.

Specifications

Compatible with

iPhone 13 (A2633, A2482, A2631, A2634, A2635)

Model reference

A2633, A2482, A2631, A2634, A2635

Part type

Flex cable / button

Quality

Compatible

Warranty

2-year legal guarantee of conformity

Difficulty

Difficult · ~60 min (indicative)

Estimated time

about 60 min (approximate)

Benefits

• Third-party manufacture: the lowest price to repair
• Compatibility with the stated model checked on the product page
• 2-year legal guarantee of conformity