Bracket for iPhone 16 (20 pins) – Compatible

Description

This iPhone 16 bracket (20 pin) is a compatible spare part designed to secure and hold an internal component of the device in place. It provides a stable support for the connectors and ensures good alignment during assembly. Wear or breakage of this bracket can cause poor contact, instability of the component or an intermittent fault. Replacing this part can therefore help restore normal operation, provided the fault really comes from this bracket.

Before you start, switch the device off completely and disconnect the battery where possible to avoid any short circuit. Work on a clean surface and use an antistatic wrist strap or regularly touch a metal ground to limit static electricity. Note the position and orientation of each element before removing it, and handle the ribbon cables with care, without bending or forcing them.

After fitting, check that the part is correctly positioned and that all contacts are firmly in place. Then switch the device back on and test the affected functions before closing the casing. If a lithium battery is present, do not puncture it, do not bend it and never use a swollen battery.

Tips

• Switch off the device and disconnect the battery before any work
• Use an antistatic wrist strap to limit static electricity
• Do not force ribbon cables and connectors when removing parts
• Check the alignment of the bracket before screwing back or closing
• Test the affected functions before reassembling the casing

Fitting

Fitting guide: work with the device switched off, disconnect the battery before touching any flex cable, keep the screws in order and test the part before closing up. A question before ordering? Write to us.

Specifications

Compatible with

iPhone 16

Part type

Other part

Quality

Compatible

Warranty

2-year legal guarantee of conformity

Benefits

• Third-party manufacture: the lowest price to repair
• Compatibility with the stated model checked on the product page
• 2-year legal guarantee of conformity