Screw for iPhone 16 Pro (complete set) – Compatible

Description

This compatible screw set is designed for the iPhone 16 Pro. It is used to secure the various internal and external components of the device during a repair: fixing the motherboard, flex cable brackets, the frame or certain components. When screws are lost, damaged or poorly tightened, the phone may not hold together properly, produce vibrations or noises, and its parts may come loose. This set lets you replace these fixings when needed.

Before you start, work on a clean, well-lit surface, with an anti-static mat if possible. Keep the screws together and note where each one goes, as they are not all the same length. Switch off the device and disconnect the battery before touching the flex cables. Never force a screw and use a suitable screwdriver to avoid scratching the heads.

Once reassembly is complete, check that each component is firmly fixed and that no screw is protruding. Make sure the phone is not distorted and that nothing moves inside. If a screw is difficult to tighten, stop and check its alignment.

Tips

• Note the position of each screw before removing it
• Use a suitable screwdriver so the heads are not damaged
• Disconnect the battery before touching the flex cables
• Never force a screw, even if it resists
• Check that no screw is protruding after reassembly

Fitting

Fitting guide: work with the device switched off, disconnect the battery before touching any flex cable, keep the screws in order and test the part before closing up. A question before ordering? Write to us.

Specifications

Compatible with

iPhone 16 Pro

Part type

Screws

Quality

Compatible

Warranty

2-year legal guarantee of conformity

Benefits

• Third-party manufacture: the lowest price to repair
• Compatibility with the stated model checked on the product page
• 2-year legal guarantee of conformity