Screw for iPhone 6 Plus (complete set) – Compatible

Description

This complete set brings together the screws needed to refit the various parts of the iPhone 6 Plus during a repair. They are used in particular to hold the motherboard, the flex cable and the internal components in place, and to close the casing once the repair is finished. These are compatible screws, made by a third party: they let you replace missing or damaged screws without changing how the device is assembled.

Before you start, prepare a clean, well-lit workspace fitted with a magnetic mat so that the small screws do not get lost. Use a screwdriver suited to the size of the screw heads, without forcing it, and note where each removed screw goes. Compare the lengths with the current part before reassembling, as a screw that is too long can damage a component.

Once assembly is complete, check that each screw is tight without being forced and that the casing shows no play. Remember to discharge your static electricity by touching a metal surface before handling the components, and disconnect the battery before any work on a flex cable.

Tips

• Note the position of each screw before removing it
• Use a magnetic mat so the small screws do not get lost
• Compare screw lengths before reassembling
• Tighten without forcing to avoid damaging the thread
• Disconnect the battery before any work on a flex cable

Fitting

Fitting guide: work with the device switched off, disconnect the battery before touching any flex cable, keep the screws in order and test the part before closing up. A question before ordering? Write to us.

Specifications

Compatible with

iPhone 6 Plus

Part type

Screws

Quality

Compatible

Warranty

2-year legal guarantee of conformity

Benefits

• Third-party manufacture: the lowest price to repair
• Compatibility with the stated model checked on the product page
• 2-year legal guarantee of conformity