Screw for iPhone 6S (complete set) – Compatible

Description

This compatible screw set is designed for the iPhone 6S. It is used to replace the small screws that hold the frame, the motherboard, the battery or the flex cables inside the device. A missing, damaged or badly tightened screw can cause abnormal play in the casing, a faulty contact or a component that comes loose.

The set is supplied in a compatible version, made by a third party. It is therefore a functional replacement, to be used with care. Before you start, work on a clean, well-lit surface, with a magnetic mat to keep the screws sorted by position. A suitable screwdriver prevents the heads from being stripped. To avoid electrostatic discharge, touch an earthed metal surface before handling the components.

For your safety, disconnect the battery before any work on the flex cables. Never puncture, bend or force a battery. If it is swollen, stop using it. After reassembly, check that each screw holds without force and that the casing closes properly. Then test the device before closing it up completely.

Tips

• Lay the screws out in the order of removal on a magnetic mat
• Use a suitable screwdriver so you do not damage the heads
• Tighten without force, an overtightened screw can crack the frame
• Disconnect the battery before any work on the flex cables
• Check that the device works properly before closing it up

Fitting

Fitting guide: work with the device switched off, disconnect the battery before touching any flex cable, keep the screws in order and test the part before closing up. A question before ordering? Write to us.

Specifications

Compatible with

iPhone 6S

Part type

Screws

Quality

Compatible

Warranty

2-year legal guarantee of conformity

Benefits

• Third-party manufacture: the lowest price to repair
• Compatibility with the stated model checked on the product page
• 2-year legal guarantee of conformity