Screw for iPhone 7 (complete set) – Compatible

Description

This screw set compatible with iPhone 7 contains the small screws that hold the device's internal components in place: motherboard, flex cables, battery bracket and chassis. It is used to close the phone neatly after a repair, for example when replacing the screen, the battery or the charging connector. Loose or lost screws can cause play in the case or poor contact between some parts.

Before you start, prepare a clean, well-lit work surface, with a magnetic mat or a container to keep each screw in its place. Work on a non-conductive surface and discharge static electricity by touching a metal surface. Disconnect the battery before touching the flex cables, do not bend the battery and never puncture it. If it is swollen, do not try to reuse it.

Once assembly is complete, check that all screws are in place, that none is protruding and that the case is properly assembled. Switch the device back on and check the operation of the parts you replaced. If you changed the battery, carry out a few full charge cycles to let the system adapt.

Tips

• Keep each screw in the order of removal so they do not get mixed up
• Use a suitable screwdriver to avoid damaging the screw heads
• Do not overtighten: an overtightened screw can crack the case
• Disconnect the battery before any work on the flex cables
• Test the function after reassembly before closing the case completely

Fitting

Fitting guide: work with the device switched off, disconnect the battery before touching any flex cable, keep the screws in order and test the part before closing up. A question before ordering? Write to us.

Specifications

Compatible with

iPhone 7

Part type

Screws

Quality

Compatible

Warranty

2-year legal guarantee of conformity

Benefits

• Third-party manufacture: the lowest price to repair
• Compatibility with the stated model checked on the product page
• 2-year legal guarantee of conformity