Kit vis for iPhone X

Description

This kit contains compatible screws for the iPhone X, in silver. They are used to secure the internal components of the phone, such as the chassis, the logic board or certain parts, and to replace screws that were lost or damaged during a previous repair. A badly tightened screw or one of the wrong length can cause play, a rattle or pressure on a ribbon cable. This kit helps you restore a clean fixing after a screen, battery or connector repair.

Before you start, switch off the device and disconnect the battery. Work on a flat surface, with a magnetic mat to keep each screw in its place. Use a suitable screwdriver, without forcing it, and tighten gently so as not to damage the thread. Note the location and length of each screw removed so you do not mix them up.

Once reassembly is complete, check that every screw is properly in place and that the phone has no play. Then test the screen, buttons and charging. To limit the risk of static electricity, avoid working on a wool or carpet surface.

Tips

• Disconnect the battery before touching the internal ribbon cables
• Note the location and length of each screw removed
• Use a magnetic mat so you do not lose any screws
• Tighten without forcing to avoid damaging the thread
• Never puncture or bend the lithium battery

Fitting

Fitting guide: work with the device switched off, disconnect the battery before touching any flex cable, keep the screws in order and test the part before closing up. A question before ordering? Write to us.

Specifications

Compatible with

iPhone X

Part type

Screws

Quality

Compatible

Colour

Silver

Warranty

2-year legal guarantee of conformity

Benefits

• Third-party manufacture: the lowest price to repair
• Compatibility with the stated model checked on the product page
• 2-year legal guarantee of conformity