IC Chip for iPhone 6S
Compatible — Third-party manufacture. The lowest price for a repair.
This part also fits: iPhone 6S Plus.
- integrated circuit · Pilote rétroéclairé ref. U4020€6.90
- integrated circuit · USB Charging Control ref. U4500€7.90 · unavailable
- integrated circuit · Flash Driver ref. U3300€8.90
- integrated circuit · Grand Anneau Audio réf. U3500€9.90
- integrated circuit · USB charging ref. U2300€13.90
- integrated circuit · Coil rétroéclairé réf. L4050 réf. L4020 ref. L1503€14.90
- integrated circuit · Power Control ref. U2000€14.90
See the 7 versions and their prices
- integrated circuit · Pilote rétroéclairé ref. U4020 · Compatible€6.90
- integrated circuit · Flash Driver ref. U3300 · Compatible€8.90
- integrated circuit · Grand Anneau Audio réf. U3500 · Compatible€9.90
- integrated circuit · USB charging ref. U2300 · Compatible€13.90
- integrated circuit · Coil rétroéclairé réf. L4050 réf. L4020 ref. L1503 · Compatible€14.90
- integrated circuit · Power Control ref. U2000 · Compatible€14.90
- integrated circuit · USB Charging Control ref. U4500 · Compatible€7.90unavailable
Your choice: integrated circuit · USB Charging Control ref. U4500 · Compatible
The kit for a successful repair
or just what you need:
Check your exact model before ordering: a iPhone 6S does not accept parts from another version (mini, Plus, Pro, Ultra…). Find my model
Description
This IC chip, reference U4500, is an integrated circuit that manages battery charging when the device is connected to a USB socket. It regulates the current and voltage sent to the battery in order to protect the cells and ensure stable charging. It sits in the charging module of iPhone 6S. A fault at this level can mean a phone that no longer charges, charges very slowly, or won't start up once plugged in.
Before any work, switch off the device and disconnect the battery. Work on a clean surface, with an anti-static wrist strap if possible. Note the orientation of the current part before removing it, and use a hot air station at a moderate temperature so you don't damage the neighbouring tracks.
Once the fitting is complete, check the solder joints under a microscope and make sure no short circuit remains. Reconnect the battery, then carry out a few full charge and discharge cycles before considering the repair validated. If the battery is swollen, never use it, puncture it or bend it.
Tips
- Disconnect the battery before handling the board
- Work with an anti-static wrist strap to protect the chip
- Use moderate heat so you don't damage the tracks
- Check the solder joints under a microscope before powering up again
- Run several charge cycles to validate the repair
Fitting
Fitting guide: work with the device switched off, disconnect the battery before touching any flex cable, keep the screws in order and test the part before closing up. A question before ordering? Write to us.
Specifications
- Compatible with
- iPhone 6S
- Part type
- Electronic component
- Quality
- Compatible
- Warranty
- 2-year legal guarantee of conformity
- Difficulty
- Estimated time
- about 90 min (approximate)
Benefits
- Third-party manufacture: the lowest price to repair
- Compatibility with the stated model checked on the product page
- 2-year legal guarantee of conformity